Description
Jet Lube TF-15 23015 Thread Sealant with PTFE for Fiberglass Pipe (Passes California COR Title 22) 5 Gal. Pail
- Non Metallic, Non Volatile, Solvent Free
- Lubricates for tighter makeup with less torque
- Seals at temperatures to 600Deg F
- Seals at pressures to 10,000 psi
- Seals badly worn threads as tight as new
- Seals applications exposed to H2S and salt water
- 0.7 Friction Factor (relative to API-MODIFIED)
- Available in Arctic, H2S and Thermal grades
TF-15 is a high-pressure sealant containing PTFE, graphite, CZ-EX (JET-LUBE’s extreme pressure additive), and rust, corrosion, and oxidation inhibitors. All are blended in JET-LUBE’s aluminum complex grease manufactured using highly refined, low-sulfur oil to ensure brushability over a wide temperature range, tenacious adherence to all surfaces, resistance to water washout, and prevention of rust/corrosion. TF-15 is highly recommended for use on fiberglass casing and tubing by several manufacturers. TF-15 assures tight makeup at low torque and allows easy breakout without seizing, stripping, or galling. It provides a permanent seal and maintains joint efficiency under vibration, pressure, surge, and temperature fluctuations. It is particularly useful in areas subject to salt water, a wide variety of oils, solvents, gases (except oxygen), acids, alkalis and steam. Withstands liquid pressures to 10,000 psi. NLGI Grade 1-1/2. Sizes: 1gal, 2gal, 5gal, 15 gal, 50 gal
- Thickener Aluminum Complex
- Fluid Type Petroleum
- Dropping Point (ASTM D-2265) 450Deg F (232Deg C)
- Specific Gravity 1.21
- Density (lb/gal) 10.1
- Oil Separation <3.0
- WT. % LOSS @ 212Deg F (100Deg C)
- Flash Point (ASTM D-92) >430Deg F (221Deg C)
- NLGI Grade 1½
- Penetration @77Deg F (ASTM D-217) 275 - 305
- Copper Strip Corrosion 1A
- (ASTM D-4048)
- Shell 4-Ball (ASTM D-2596)
- Weld Point, kgf 620
- Friction Factor 0.7
Product Features
Extended Information
Technical Specs
*The list price may not necessarily be the price at which the product or service is sold.
