Ingersoll-Rand ZAW130040S Pneumatic Balancer, ZA Series, Capacity 1300 lbs, W/ Z-Stop

Ingersoll-Rand ZAW130040S Pneumatic Balancer, ZA Series, Capacity: 1300 lbs The Ingersoll Rand ZA series balancer is the most common, and is designed for high speed, precision handling of variable weight loads. Up/down movement is accomplished through the use of an ergonomically designed pendant with low-effort, color coded thumb levers. After positioning the load with the pendant control, the unit defaults into a "Float" mode that allows the operator up to 18 in (457 mm) to manually adjust the load for final positioning. Product Features: Includes the Z-Stop: Z Stop is a patented device that will eliminate the down-drift of suspended loads or tools during shut down or at night when the air supply is shut off. The Z Stop will stop drift within 6 inches (152.4 mm) and put the Balance Air into a mechanically locked position preventing damage to tools or objects below the suspended load. Pendant Control: Ergonomic Up/Down pendant control for variable speed and feathering of load Safety: If the air supply is ever interrupted, the unit will maintain the load in the suspended position Standard emergency cable retract brake: If the load is accidentally lost, a spring loaded centrifugal brake automatically stops the rapid upward cable travel Standard overload protection: The load being lifted can never exceed the unit’s maximum rated capacity at a given air pressure Cable travel: Length of wire rope up to 30 ft (9.1 mm) with cable travel up to 120 inches (3048 mm) depending on model and configuration