Description
Jet Lube FMG 30116 Food Machinery Aluminum-Complex Grease NSF H1/FDA-21CFR 178.3570 35 Lb. 5 Gal. Pail
- Aluminum Complex Grease
- Polymer Additives
- Non-Pound Out Formula
- Bacteriostatic Agent
- Anti-Wear Additives
FMG is an aluminum complex grease lubricant of the USDA Authorized H-1 type. It meets or exceeds the requirements of CFR Title 21, Section 178.3750 of FDA Regulations and is specifically designed for use in the food processing industry where it may have incidental food contact. FMG has been formulated to perform in a wide variety of operating conditions. It is extremely water resistant and will remain in place even after frequent wash downs. Polymer additives provide adhesive/cohesive strength to protect against pound-off when shock loads are encountered. FMG is recommended for the lubrication of roller, needle, ball, journal, and sliding bearings in the food processing and handling industry. Color - White. Sizes: 14 oz. cart, 35 lb, 120 lb, 400 lb.
- Thickener Aluminum Complex
- Fluid Type White Oils & Synthetic
- Color/Appearance White Grease
- Specific Gravity .94
- Density (lb/gal) Typical 7.80
- Additive Type Zinc Oxide & Organic
- R&O
- Dropping Point (ASTM D-566) >500Deg F (260Deg C)
- Flash Point Deg F (Deg C) >430 (221)
- (ASTM D-92)
- Autoignition Point >500Deg F (260Deg C)
- (CALCULATED)
- NLGI Grade 2
- Penetration @ 77Deg F 265 - 295
- (ASTM D-217) mm x 101
- Copper Strip Corrosion 1A
- (ASTM D-4048)
- 4-Ball (ASTM D-2596)
- Weld Point, kgf 200
- Load Wear Index 30
- Wear Scar Diameter 0.7
- Oxidation Resistance <5.0
- (ASTM D-942) PSI Drop, 100 hrs.
- Base Oil Viscosity 90 - 110 (ASTM D-445) cSt @ 40Deg C
Product Features
Extended Information
Technical Specs
*The list price may not necessarily be the price at which the product or service is sold.
