Description
Dwyer DH3-016 Differential Pressure Controller, range 2.5-0-2.5" w.c. Series DH3 Digihelic® Differential Pressure Controller. Digihelic® Controller in Photohelic® Gage, Square Root Output for Flow
- The Series DH3 Digihelic® Differential Pressure Controller is a 3 in 1 instrument possessing a digital display gage, control relay switches, and a transmitter with current output all packed in the popular Photohelic® gage style housing. Combining these 3 features allows the reduction of several instruments with one product, saving inventory, installation time and money. The Digihelic® controller is the ideal instrument for pressure, velocity and flow applications, achieving a 1% full scale accuracy on ranges down to the extremely low 0.25" w.c. to 2.5" w.c. full scale. Ranges of 5" w.c. and greater maintain 0.5% F.S. accuracy. Bi-directional ranges are also available.
- The Series DH3 Digihelic® controller allows the selection of pressure, velocity or volumetric flow operation in several commonly used engineering units. 2 SPDT control relays with adjustable deadbands are provided along with a scalable 4-20 mA process output.
- Programming is easy using the menu key to access 5 simplified menus which provide access to: security level; selection of pressure, velocity or flow operation; selection of engineering units; K-factor for use with flow sensors; rectangular or circular duct for inputting area in flow applications; set point control or set point and alarm operation; alarm operation as a high, low or high/low alarm; automatic or manual alarm reset; alarm delay; view peak and valley process reading; digital damping for smoothing erratic process applications; scaling the 4-20 mA process output to fit your applications range and field calibration.
- Service: Air and non-combustible, compatible gases.
- Wetted Materials: Consult factory.
- Housing Material: Die cast aluminum case and bezel.
- Accuracy: < 5" w.c. (except +/-2.5" w.c.): +/-1%; All other ranges: +/-0.5% at 77Deg F (25Deg C) including hysteresis and repeatability (after 1 hour warm-up).
- Stability: < +/-1% per year.
- Pressure Limits: Ranges ? 2.5" w.c.: 25 psi; +/-2.5", 5" w.c.: 5 psi; 10" w.c.: 5 psi; 25" w.c.: 5 psi; 50" w.c.: 5 psi; 100" w.c.: 9 psi.
- Temperature Limits: 32 to 140Deg F (0 to 60Deg C).
- Compensated Temperature Limits: 32 to 140Deg F (0 to 60Deg C).
- Thermal Effects: 0.020%/Deg F (0.036/Deg C) from 77Deg F (25Deg C).
- Power Requirements: 12-28 VDC, 12-28 VAC 50-400 Hz.
- Power Consumption: 3 VA max.
- Output Signal: 4-20 mA DC into 900 ohms max.
- Zero & Span Adjustments: Accessible via menus.
- Response Time: 250 ms (damping set to 1).
- Display: Backlit 4 digit LCD 0.4" height LED indicators for set point and alarm status.
- Electrical Connections: 15 pin male high density D-Sub connection. 18" (46 cm) cable with 10 conductors included. 4' and 10' cables available.
- Process Connections: 1/8" female NPT. Side or back connections.
- Mounting Orientation: Mount unit in vertical plane.
- Size: 5" (127 mm) O.D. x 3-1/8" (79.38 mm).
- Weight: 1.75 lb (794 g).
- Agency Approvals: CE
Product Features
Extended Information
Technical Specs
Prop 65 Warning: Product's may contain one or more substances or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.
*The list price may not necessarily be the price at which the product or service is sold.
